Written by Chris Goodell, P.E., D. WRE | WEST Consultants
Copyright © RASModel.com. 2010. All rights reserved.
I would appreciate any feedback from you all on this topic. It's something I've been thinking about for a while now. My biggest concern with the current practice of dam breach modeling is the overwhelming uncertainty associated with dam breach parameters. Not only the ultimate breach shape and development time, but things like the initiation mechanism of the breach, the discharge coefficients (both weir and orifice), and the progression rate. The deterministic approach we use leaves a bit to be desired in my opinion. Sensitivity analyses have shown that the breach outflow hydrograph can easily vary by 100% or more, based on the set of parameters used. I've been considering ways to generate a breach outflow hydrograph based on probabilistic methods. The idea being instead of providing our "best conservative guess" for the breach hydrograph, we can produce a 95% (or whatever percent) conditional non-exceedance hydrograph based on both overall peak discharge and also timing. Meaning, this is the dam breach hydrograph that will not be exceeded in peak value 95% of the time, given a dam failure for a given failure mechanism (overtopping or piping). This is done by assigning probablity distribution functions to each breach parameter, then run a Monte Carlo simulation using random assignments (within the minimum and maximum bounds and following the prescribed distribution function) for each breach parameter. Then we can plug the resulting 95% hydrograph (or the associated set of breach parameters to create that hydrograph) into our HEC-RAS unsteady flow model and resume our deterministic approach. At least we have taken the deterministic selection of breach parameters out of the analysis. I suppose at some time, the entire model could be approached with probabilistic methods, but first things first. In fact, HEC is currently working on implementing Monte Carlo simulation capabilities into HEC-RAS for a future release.
I wonder if any state Dam Safety office is ready for this type of analysis for preparing inundation maps for emergency action plans. I think it makes more sense.
Copyright © RASModel.com. 2010. All rights reserved.
I would appreciate any feedback from you all on this topic. It's something I've been thinking about for a while now. My biggest concern with the current practice of dam breach modeling is the overwhelming uncertainty associated with dam breach parameters. Not only the ultimate breach shape and development time, but things like the initiation mechanism of the breach, the discharge coefficients (both weir and orifice), and the progression rate. The deterministic approach we use leaves a bit to be desired in my opinion. Sensitivity analyses have shown that the breach outflow hydrograph can easily vary by 100% or more, based on the set of parameters used. I've been considering ways to generate a breach outflow hydrograph based on probabilistic methods. The idea being instead of providing our "best conservative guess" for the breach hydrograph, we can produce a 95% (or whatever percent) conditional non-exceedance hydrograph based on both overall peak discharge and also timing. Meaning, this is the dam breach hydrograph that will not be exceeded in peak value 95% of the time, given a dam failure for a given failure mechanism (overtopping or piping). This is done by assigning probablity distribution functions to each breach parameter, then run a Monte Carlo simulation using random assignments (within the minimum and maximum bounds and following the prescribed distribution function) for each breach parameter. Then we can plug the resulting 95% hydrograph (or the associated set of breach parameters to create that hydrograph) into our HEC-RAS unsteady flow model and resume our deterministic approach. At least we have taken the deterministic selection of breach parameters out of the analysis. I suppose at some time, the entire model could be approached with probabilistic methods, but first things first. In fact, HEC is currently working on implementing Monte Carlo simulation capabilities into HEC-RAS for a future release.
I wonder if any state Dam Safety office is ready for this type of analysis for preparing inundation maps for emergency action plans. I think it makes more sense.
